Exploring Revenge of the Savage Planet is an enjoyable experience, but as you delve deeper, you might find yourself wanting more. Each planet showcases its own distinct environments, ecosystems, and creatures, igniting your curiosity at every turn.
To fully explore these alien landscapes, you’ll need upgrades. For crafting these upgrades, gathering resources is essential, and among these, Printer Slurries are among the rarest. Unlike other materials, Printer Slurries won’t drop from enemies but are tucked away in specific locations. The savannah-themed planet Quasadron IX has numerous Printer Slurries, and this guide will help you find them easily.
Locations of All Savannah Lake Printer Slurries
First Printer Slurry Location
For this one, you’ll need the Blight Bomb Stabilizer upgrade.
Start by going east from the Savannah Lake teleporter. You’ll come across an area filled with stone pillars and sticky pink ground, home to Sluggators. Here, you’ll find a breakable floor you must destroy as part of a quest involving the Alpha Sluggator.
Once you drop down, look for a crack covered in amber on the west side of the cave. Use the Blight Bomb to break the amber and enter the crack; that’s where you’ll find the Printer Slurry.
Second Printer Slurry Location
From the Savannah Lake teleporter, head southeast. On a rock in the river, you’ll spot an unopened crate that contains a Printer Slurry, but it will require some unlocking first.
Fast travel to the Summit point. To the west, there’s a large amber mass—you’ll need to break this using the Blight Bomb. After clearing the amber, look for a cracked section on the ground and Stomp on it. This will send you sliding down a long tunnel.
As you slide, shoot the glowing pink devices along the way. Once you’ve shot them all, the tunnel will drop you off near the crate containing the Printer Slurry.
Third Printer Slurry Location
Go directly north from the Savannah Lake teleporter and enter the lake. Keep the land on your right. When you see a Blight Bomb Plant, direct your gaze to the northeast to find a tall, narrow rock structure rising from the water.
Climb to the top of this formation to find a lid-like object with a red center. Destroy it by Stomping from mid-air, which requires a Double Jump followed by a well-timed Stomp.
For the Stomp, make sure you have the Launch Boosters, Advanced Stomp Boosters, and Quadruple Thrusters upgrades. Once you land a strong enough Stomp on the lid, it will open, revealing the Printer Slurry.
Fourth Printer Slurry Location
To locate this one, move south from the Savannah Lake teleporter. At the river’s end, you’ll find a tree-like creature known as the Baobab Maw. Stand in front of it and dive to the bottom of the lake to find the Printer Slurry on the lakebed.
Fifth Printer Slurry Location
For this Printer Slurry, head west from the Savannah Lake teleporter. You will find three pillar-like rock formations next to each other. The Printer Slurry is on top of these, but you won’t grab it just yet.
Instead, look north to find another set of three pillar-shaped formations covered in vines. Go to the right side base of this section where you’ll come across some amber. Use a Blight Bomb to break it open, revealing a metal box. Lift it and climb to the top of the rock formation.
Once there, place the box on the button to activate a nearby air vent, allowing you to enter it. Inside, you’ll find a cracked wall; destroy it using a Bombegranate to get to the Printer Slurry.
Sixth Printer Slurry Location
Return to the rock formation where you found the previous Printer Slurry. On top, there are wilted mushrooms; use your hose to spray them with water, causing them to grow into platforms.
Use these mushroom platforms to reach the top of the formation. Because you placed the metal box on the button, an air vent should now be active at the top.
Utilize the Drone Glider upgrade to ride the air current upwards. While in the air, spray the mushrooms on the nearby stone pillars to transform them into yellow platforms.
Climb to the highest stone pillar, then look south to spot another trio of stone pillar formations in the distance. Glide towards them and use your grapple to reach the next Printer Slurry.
Seventh Printer Slurry Location
For this one, navigate west from the Savannah Lake teleporter to the three pillar-like rock formations. Proceed south from there, and you’ll see a crate holding a Printer Slurry.
Before you can open it, you need to take down all the nearby creatures, especially the Arffalo. Burst its blob-like shell using the Whip to defeat it. Once you’ve cleared out the creatures, use a Blight Bomb on the amber-covered crate to access the Printer Slurry.
Locations of All Babutt Kingdom Printer Slurries
First Printer Slurry Location
From the Babutt Kingdom teleporter, look to the southwest. Move along the left side of the giant tree while keeping it on your right. Behind the tree, you’ll find a brown barrier called Batterus Lo, familiar from your previous explorations.
To break through, find a nearby Ferro Dispenser near one of the fluffy tree-like plants to gather Ferro Goo. First, target the electrified mushroom on the left of the barrier and spray Ferro Goo to connect it to the small mushroom next to it.
Next, head to the right side of the tree to find two more small mushrooms. Create Ferro Goo connections from the electrified mushroom to these two as well, noting that one is under the tree’s roots. Once you’ve electrified all the mushrooms, the brown barrier will vanish, letting you access the Printer Slurry.
Second Printer Slurry Location
From the Babutt Kingdom teleporter, head towards the cliff’s base to your southeast, keeping the cliff wall on your right. When you reach the Vitality Plant near the river, look again to the southeast; you’ll see a green barrier on the cliff wall.
Approach it and use your Remote Drone to guide Eko through the green barrier. Navigate Eko through the red barriers and connect it to the device inside.
Soon after, swim to the center of the circular lilypads in front of you, dive underwater, and you’ll spot the crate surrounded by red barriers.
Check the purple cables around the crate; they lead to two small green barriers underwater. Exit the water, use Eko to activate both green barriers, and once they’re powered, the red barriers will drop, allowing you to retrieve the Printer Slurry.
Third Printer Slurry Location
Begin at the Babutt Kingdom teleporter again and head to the base of the cliff to your southeast. Keep the cliff wall on your right. When you reach the Vitality Plant by the river, look east to see a cave entrance blocked by pink crystals.
Enter the cave and carefully navigate through, avoiding spiked traps, until you reach the end. Upon exiting the cave, you’ll find yourself in an area with tall grass. If you move east, you’ll find the Printer Slurry, but you need to follow the purple cables to open its crate.
Behind the large tree to the east of the crate, you will see a purple button. Another purple button is behind a rock to the south, and the third is to the right of a tree northwest of the crate. Quickly shoot all three buttons to unlock the crate and claim the Printer Slurry.
These buttons can reset, so you’ll need to shoot them all in quick succession. To facilitate this, climb onto the rock northeast of the crate to easily shoot two buttons, then move to the other rock to shoot the last one.
Locations of All Summit Printer Slurries
Head east from the Summit teleporter where you’ll find a crate containing a Printer Slurry. However, nearby creatures must be defeated first. To open the crate, follow the cable linked to it; the device it connects to is inactive. By locating the active device along the cable’s path, you can activate it.
Shoot the active device and backtrack to activate each device in order before time runs out, or you’ll need to restart the process.
If you’re having trouble, you can simplify it by spraying water on the pink goo on the ground. However, dodging and speeding through the area while shooting accurately is usually the best approach to save time.
Locations of All Florian’s Fuchsia Festivus Printer Slurries
First Printer Slurry Location
From the teleporter in this area, move north. After crossing the river from the waterfall, look northwest to spot some column-shaped rocks in the valley below.
Leap down to find a crate containing a Printer Slurry. To unlock it, you’ll have to energize the vein-like roots on the crate.
Start by looking south for an electric mushroom on the ceiling of the rock formation and nearby, a plant where you can extract Ferro Goo. You’ll need to connect the electric mushroom to the ground mushroom by applying Ferro Goo.
Your aim is to establish an electrical connection between the mushrooms. Even if you didn’t bring down the mushroom, spraying Ferro Goo all over the rock formation is the simplest way to tackle this.
After creating the electrical link, return to the crate and look north to find another rock column. This next part is easier—just bring down the electric mushroom using the Magnetic Fork, which will then open the crate for you to retrieve the Printer Slurry.
Second Printer Slurry Location
To find this Printer Slurry, head southeast from the teleporter in this area. Ascend the cliff ahead and jump into the canyon-like pathway below—that’s where you’ll find the crate containing the Printer Slurry. Be prepared to hack the terminal and face waves of enemies to access it.
After defeating all the enemies, you can claim your Printer Slurry. Use your surroundings to your advantage and prioritize eliminating the moths that heal other foes.
