الوسم: HP LaserJet Pro MFP M130fw

If you need to connect your HP LaserJet Pro MFP M139fw to a wireless network but don’t have the WPS PIN, you’re in the right place. This guide will walk you through how to find that WPS PIN and get your printer connected easily.

The accepted solution for this situation is to access the printer’s control panel. Here’s how to do it step by step:

1. Turn on Your Printer: Ensure your printer is powered on and ready.

2. Access the Control Panel: Look for the control panel on your printer. This usually has a display screen and several buttons.

3. Go to Network Settings: Navigate through the menu on the control panel. Look for options related to ‘Network’ or ‘Wireless’. You may need to use the arrow keys to scroll through the menu.

4. Find WPS Settings: Within the network settings menu, look for a section labeled ‘WPS’ or ‘Wi-Fi Protected Setup’. Select this option.

5. Generate WPS PIN: Here, you should see an option to view or generate the WPS PIN. The printer will display the PIN on the screen.

6. Connect to Your Network: Once you have the WPS PIN, go to your wireless router’s settings. Use the WPS feature on your router and enter the PIN on your printer when prompted.

7. Final Steps: Follow any additional instructions on the printer display to complete the connection process. Once connected, you should see a confirmation message.

That’s it! You’ve successfully found the WPS PIN and connected your HP LaserJet Pro MFP M139fw to your wireless network. Now you can print wirelessly wherever you need! If you face any issues, consult your printer’s user manual or HP’s customer support for further assistance.

If you’re experiencing issues with your M130FW printer, resetting the NVRAM (Non-Volatile Random Access Memory) can often help solve various problems. This guide will walk you through the steps to reset the NVRAM on your M130FW printer.

1. Turn Off the Printer: Start by turning off your printer. Make sure it is completely powered down before proceeding.

2. Locate the Reset Button: Find the reset button on your printer. This button is usually located on the control panel. Check the user manual if you need help locating it.

3. Press and Hold the Reset Button: After you’ve found the reset button, press and hold it down. Keep holding it for about 5 to 10 seconds.

4. Turn On the Printer: While still holding the reset button, turn the printer back on. You should continue to hold the button until you see the printer’s lights indicate that it is starting up.

5. Release the Reset Button: Once the printer has powered on and the lights stabilize, you can release the reset button.

6. Verify the Reset: After the printer has completed its startup process, check to see if the issues you were facing have been resolved. If the problems persist, you may need to repeat the process or consult the user manual for further troubleshooting tips.

By following these simple steps, you can reset the NVRAM on your M130FW printer, which may help eliminate any errors or performance issues. This easy fix can save you time and hassle, getting your printer back in working order without the need for professional assistance. Remember to keep your printer’s software updated and refer to the user manual for additional support whenever needed.

If your printer has suddenly stopped printing, it can be frustrating. Recently, I faced a similar issue with my own printer. After investigating, I discovered a small blue plastic part that was causing all the trouble. Here’s a step-by-step guide to help you troubleshoot your own printing problem.

First, check the toner cartridge and drum. To do this, follow these simple steps:

1. Remove the Toner Cartridge: Open your printer and carefully take out the toner cartridge. This is usually a large component that is easy to pull out. Be sure to follow any specific instructions in your printer manual.

2. Take Out the Drum Unit: After removing the toner, take out the drum unit as well. This component may be located underneath the toner cartridge and is often necessary for the printing process.

3. Inspect for Loose Parts: Once both components are removed, look inside the printer. You might see a blue plastic half-circle with rubber around it, lying loose in the black plastic tray. This little part is likely important and needs to be secured for the printer to work properly.

4. Identify the Part: Examine the blue plastic piece closely. It has two short posts on either side, which means it should have a specific place to attach. Look for a metal rod or opening nearby that could be where this piece was originally fixed.

5. Reattach the Part: Gently push the blue plastic piece to fit its posts into the respective slots on the metal rod. Make sure it snaps in securely. If it doesn’t seem to fit, double-check the orientation to ensure you’re placing it correctly.

6. Reinsert the Drum and Toner: After securing the blue part, carefully put the drum unit back in first, followed by the toner cartridge. Ensure that both are fitted properly and securely.

7. Power Up Your Printer: Turn your printer back on and run a test print. If everything has been reattached correctly, your printer should resume normal operation.

8. Further Troubleshooting: If your printer still doesn’t work after following these steps, consider checking the printer’s manual or contacting customer support for additional assistance. Sometimes, other issues like software settings or connectivity problems can also prevent printing.

By following these easy steps, you should be able to resolve the printing issue related to that blue plastic part. Always remember to handle your printer components carefully to avoid any accidental damage. Happy printing!