Fix Your HP Spectre x360 Battery That Won’t Charge Fully

If you’re dealing with the frustrating issue of your HP Spectre x360 battery not charging beyond 56%, don’t worry—this is a problem that many users have faced, and there are steps you can take to troubleshoot and potentially fix it. Here’s a handy guide to help you get your laptop’s battery back on track.

First, confirm that your laptop is truly charging. Sometimes, the charging indicator might not be accurately reflecting the battery status. Here’s how to check:

1. Use the Right Charger: Make sure you’re using the original charger that came with your HP Spectre x360. Non-original chargers might not provide the required power and could lead to charging issues.

2. Check the Charging Port: Inspect the charging port on your laptop for any dust or debris that might hinder the connection. A can of compressed air can help clean it out without damaging your device.

3. Update Your Battery Drivers: Outdated battery drivers can cause your laptop to misread the battery status.

   • Go to the Device Manager by right-clicking on the Start button.
   • Locate the "Batteries" section, right-click on "Microsoft ACPI-Compliant Control Method Battery," and select "Update driver."
   • Follow the prompts to check for and install any available updates.

4. Adjust Battery Settings: Sometimes, the battery settings on your laptop can affect charging behavior.

   • Go to Settings > System > Power & battery.
   • Check the settings to ensure they are optimized for performance. Make sure the "Battery saver" is not keeping your battery from charging fully.

5. Perform a Power Reset: A power reset can help clear out any glitches affecting your battery. Here’s how to do it:

   • Turn off your laptop and unplug it.
   • Press and hold the power button for about 15 seconds.
   • Release the button, plug the laptop back in, and turn it on.

6. Check Battery Health: It’s important to know the health of your battery.

   • On Windows, you can check battery health by typing "Windows PowerShell" in the search bar, right-clicking it, and selecting "Run as administrator."
   • Once PowerShell is open, type Get-WmiObject -Class Win32_Battery and hit Enter. This will show you the status and capacity of your battery.
7. Consult HP Support: If your battery still won’t charge beyond 56% after trying all these steps, it may be time to reach out to HP Support. They can provide deeper insight and help determine if it’s a hardware issue.

By following these steps, you should be able to diagnose and potentially fix the charging problem with your HP Spectre x360. If all else fails, remember that getting professional help is always a good option. Don’t let a pesky battery issue hold you back from enjoying your laptop!